Product Resources

Product Resources

• Product Page
• Quick Start Guide
• Design Files:
  • Schematic
  • Board Dimensions
  • Enclosure Dimensions
  • ESP32 Firmware
• mosaic-X5 Datasheet
• SFE Product Showcase
• Hardware Repo

Additional Resources

• SparkPNT Forum

🏭 Manufacturer's Resources

Septentrio: mosaic-X5

Septentrio also provides great resources for the mosaic-X5:

• mosaic-X5 Product Page
  • Resources: Datasheet, firmware, manual, software tools, USB driver, etc.
• Support Portal:
  • Septentrio Knowledge Base
• Septentrio GitHub Organization:
  • mowi (mosaic wireless) open-source design
  • Set Up Guide to use Third Party OSR and SSR correction services
  • Using Septentrio's Receiver and uBlox's Pointperfect correction services for precise positioning
  • Using Septentrio's Receiver and Swift Navigation's Skylark correction services for precise positioning
• YouTube Channel
• JammerTest - Anti-Jamming and Anti-Spoofing Performance

warning

Beginning with firmware v4.15.0+, Septentrio has introduced a mandatory user login requirement. For more details, please refer to the following articles:

• Cybersecurity guidelines: general
• Cybersecurity guidelines: Log-in procedure

Recommended Articles

General Knowledge

mosaic - Getting started
Resetting a receiver
Resetting and clearing the non-volatile memory
Generating a diagnostic report of a Septentrio receiver
[How to upgrade the firmware of a Septentrio receiver](https://customersupport.septentrio.com/s/article/How-to-upgrade-the-firmware-of-a-Septentrio-receiver
) RTCMv3 messages supported by the Septentrio receivers
Interference Detection, Mitigation, and Flagging

Providing Corrections

How to set up a base station
RTK positioning with a moving baseline
Set up an (internal) NTRIP caster on a Septentrio receiver

Applying Corrections

Receive corrections over IP
Receive corrections via NTRIP
Using uBlox's correction services for precise positioning

Antenna Corrections

Antenna calibration
Applying ARP/APC offsets

Detecting and Mitigating Interference

How to Activate Wideband Interference Mitigation
How to mitigate interference with notch filters
Pulse-Blanking
Front-end Saturation Caused by Interference
Visualizing interference using the spectrum plot
SBF Analyzer: Carrier to Noise

Recommended Videos

Getting started with the mosaic receiver module
How to upgrade the firmware of a Septentrio receiver
Output NMEA data on the mosaic receiver module
Receiving NTRIP corrections on the mosaic module
Logging data to the Septentrio mosaic receiver module
Receiving corrections over an IP connection
Share the USB internet connection on your receiver
Septentrio's Agnostic GNSS Corrections program
Test-run for Septentrio's anti-jamming feature
How to Activate Wideband Interference Mitigation
How to set a notch filters
How to use a spectrum plot
mosaic - GNSS module receiver range from Septentrio

Espressif: ESP32-WROVER

Espressif also provides great resources for their ESP32 module:

• ESP32 Product Resource Page
• Espressif's Forum for the ESP32
• Espressif GitHub Organization
  • ESP32 Arduino Core
    • .json file needed for Epressif's ESP32 Arduino Core:
      

      https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json

  • ESP-IDF -- IoT Development Framework
    • Programming Guide