Product Resources
Product Specific Resources
SparkPNT SXT (GNSSDO)
SparkPNT SXT-D (GNSSDO+)
Additional Resources
- Quick Start Guide
- CH340 USB-to-Serial Converter
- Datasheet
- USB Drivers
- Windows:
CH341SER.EXE - MacOS:
CH341SER_MAC.ZIP - Linux:
CH341SER_LINUX.ZIP
- Windows:
- ESP32 Microcontroller
- Module Datasheet
- Reference Manual
- SoC Datasheet
- ESP32 Arduino Core
*.json file needed for Epressif's ESP32 Arduino Corehttps://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
- Firmware
- mosaic-T GNSS Receiver
- Datasheet
- Reference Manual
- RxTools Software Suite
- Firmware
- Antenna Info
- Part Dimensions:
- SFE Product Showcase
- Hardware Repo
- Precision Timing Products
- Fugro AtomiChron® Service
- SparkPNT Forum
🏭 Manufacturer's Resources
- Septentrio
- Fugro
- SiTime
- Rakon
- Espressif
Septentrio also provides great resources for the mosaic-T:
Recommended Articles
General Knowledge
mosaic - Getting started
Resetting a receiver
Resetting and clearing the non-volatile memory
Generating a diagnostic report of a Septentrio receiver
[How to upgrade the firmware of a Septentrio receiver](https://customersupport.septentrio.com/s/article/How-to-upgrade-the-firmware-of-a-Septentrio-receiver
)
RTCMv3 messages supported by the Septentrio receivers
Interference Detection, Mitigation, and Flagging
Timing Applications
How to set up the PolaRx5TR for timing applications?
Activating the mosaic-T for Fugro AtomiChron
How to log CGGTTS files on a PolaRx5TR?
PPS IN monitoring with a PolaRx5TR
How to get scintillation Indices from PolaRx5S receiver?
Providing RTK Corrections
How to set up a base station
RTK positioning with a moving baseline
Set up an (internal) NTRIP caster on a Septentrio receiver
Applying RTK Corrections
Receive corrections over IP
Receive corrections via NTRIP
Using uBlox's correction services for precise positioning
Antenna Corrections
Antenna calibration
Applying ARP/APC offsets
Detecting and Mitigating Interference
How to Activate Wideband Interference Mitigation
How to mitigate interference with notch filters
Pulse-Blanking
Front-end Saturation Caused by Interference
Visualizing interference using the spectrum plot
SBF Analyzer: Carrier to Noise
Recommended Videos
Getting started with the mosaic receiver module
How to upgrade the firmware of a Septentrio receiver
Output NMEA data on the mosaic receiver module
Receiving NTRIP corrections on the mosaic module
Logging data to the Septentrio mosaic receiver module
Receiving corrections over an IP connection
Share the USB internet connection on your receiver
Septentrio's Agnostic GNSS Corrections program
Test-run for Septentrio's anti-jamming feature
How to Activate Wideband Interference Mitigation
How to set a notch filters
How to use a spectrum plot
mosaic - GNSS module receiver range from Septentrio
Full details about Fugro's AtomiChron® time synchronisation service can be found on their website:
SiTime provides great resources for the SiT5358 Super-TCXO:
- Product Page
- Technical Support Portal
- MEMS Super-TCXO vs Quartz
- Application Notes:
- AN10025 - Reliability Calculations for SiTime Oscillators
- AN10039 - TCXO Frequency Stability and Frequency Accuracy Budget
- AN10063 - TCXO and OCXO Stability Degradation
- AN10064 - Improved System Performance with Digital Frequency Tuning in Precision Super-TCXOs
- AN23033 - Thermal Considerations for SiTime Products
Rakon provides great resources for the ROX5242T2 Super-TCXO:
Espressif also provides great resources for their ESP32 module:
- ESP32 Product Resource Page
- Espressif's Forum for the ESP32
- Espressif GitHub Repositories
- ESP32 Arduino Core
.jsonfile needed for Epressif's ESP32 Arduino Core:
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
- ESP-IDF -- IoT Development Framework
- ESP32 Arduino Core